Qlogic SANsurfer FC HBA Manager Application, User Manual, Page: 158 / 218

10 – Performing Diagnostics
Setting the Diagnostic Test Parameters
10-6 FS0054603-00 C
Q
10.2
Setting the Diagnostic Test Parameters
Perform the following steps to set the loopback or read/write buffer test parameters:
1. From the SANsurfer FC HBA Manager main window HBA tree, select the HBA
port.
2. Click the Diagnostics tab. The Diagnostics tabbed page displays (see
figure 10-1) .
Figure 10-1. Diagnostics Tabbed Page
The identifying information displays:
❑
Hostname. The name or IP address of the host connected to the HBA
❑
HBA Model. The QLA200/QLA2 xxx HBA
❑
Port. HBA port number
❑
Node Name. World wide HBA node name
❑
Port Name. World wide HBA port name
❑
Port ID. Port ID of the HBA port
The diagnostic test parameters are in the Test Configuration section.