5 – Managing Ports
Port Information Data Window
5-4
59264-00 A
S
Port Speed Supported
The speeds supported by the port
Symbolic Name
Port symbolic name
Diag Status
Status from the most recent Power On Self
Test
Diag Fault Code
Fault code from the most recent Power On
Self Test
Test Status
Status from the most recent port test
Test Fault Code
Fault code from the most recent port test
Advanced Group
MFS Mode
Multiple Frame Sequence bundling status.
I/O Stream Guard
RSCN message suppression status. Sta-
tus can be enabled, disabled, or automati-
cally determined by the switch.
Device Scan
Device scan status. Enabled means the
switch queries the connected device dur-
ing login for FC-4 descriptor information.
Auto Performance Tuning
Enables the switch to dynamically control
the MFS_Enable, VI_Enable and
LCF_Enable features based on the opera-
tional state of the port.
AL Fairness
Controls how frequently the switch can
arbitrate for access. Applies only affects
ports running in loop (FL) mode.
Port Binding
N/A - does not apply to this switch
Upstream ISL
The ISL over which the switch sends
requests intended for the principal switch
Downstream ISL
The ISL over which the switch has
received requests intended for the princi-
pal switch.
Extended Credits Group
Extended Credits Requested
Number of requested credits
Table 5-1. Port Information Data Window Entries (Continued)
Entry
Description
Summary of Contents for SANbox 5802V
