3 – Managing Fabrics
Zoning
3-28
59264-00 A
S
Renaming a Zone Set
To rename a zone set, do the following:
1.
In the Zone Sets tree of the Edit Zoning dialog, click the zone set to be
renamed.
2.
Open the Edit menu and select
Rename
.
3.
In the Rename Zone Set dialog, enter a new name for the zone set.
4.
Click the
OK
button.
Removing a Zone Set
Removing a zone set from the database affects the member zones in the following
ways.
Member zones that are members of other zone sets are not affected.
Zones that are currently not in a zone set are considered to be part of the
“orphan zone set”. The orphan zone set is not an actual zone set, but rather
a way of displaying the zones that are not currently in a zone set.
To remove a zone set, do the following:
1.
Open the Zoning menu and select
Edit Zoning
to open the Edit Zoning
dialog.
2.
In the Zone Sets tree, select the zone set to be removed.
3.
Open the Edit menu, and select
Remove
to remove the zone set.
4.
Click the
Apply
button to save changes to the zoning database.
Alternatively, you may use shortcut menus to remove a zone set from the
database.
Summary of Contents for SANbox 5802V
