The rider with one passenger,front tire: 175kPa rear
tire: 225kPa
Motorcycle load has an absolute effect to various
characteristics of the motorcycle itself, such as operation
and control, braking, performance and even safety.
Articles, if loaded, must be tightly tied and must not
get loose. The heaviest objects should be packed and
placed close to the motorcycle center with weight
distributed evenly to the two sides of the motorcycle.
Make proper adjustment to the damper in accordance
with the load, and check tire state and tire pressure. In
any case,never overload the motorcycle. Make sure
that the total weight of the driver, passenger, fittings
should not exceed the maximum load of the vehicle.
Riding an overloaded motorcycle may cause tire damages,
unexpected accidents, or even personal injury or death.
2.
Check:
Driving a motorcycle with excessively serious tire attrition
will decrease driving stability, and will cause loss of control.
It is recommended to replace the tire when the front tire
engraving depth has been decreased below0.036in, and
the rear tire, if its engraving depth has been decreased
below0.079in, should also be replaced with a new one.
Front wheel tire
Specifications
Rear wheel tire Specifications
Limit of attrition (front and rear tires) 0.315in
110/70-12 47J
120/70-12 56J
Warning
Tire engravings Tubeless tire Tire wear mark
“△
”
Tubeless tire and cast rim
This motorcycle uses cast rim fit for both tube tire and
tubeless tires, and tubeless tires are standard configuration.
Make sure not to attempt using tubeless tire onto a
wheel felloe specially designed for tube tire. Otherwise
tire may get damaged and cause personnel injury due
to sudden air leaking of the tires.
Front rim
When using a tire with an inner tube, be sure that the
Warning
Warning
USER'S MANUAL
11
