inner tube has been properly installed.
For ensuring optimum tire performance, lengthening
used life and enabling safe operation, each of the
following items should be carefully observed:
1. Before riding your motorcycle, check if the tire is with
crackles,folding or warping.If any abnormality has been
found with the tires, go to the dealer from whom the
motorcycle was originally purchased or to the appointed
maintenance station for checking. Do not check or repair
the tires yourself. If the tires are found warped or crackled,
replace them with the new ones.
2.
After replacing the tire, ride your motorcycle carefully
so as to allow the tire to match the wheel rim completely.
The tire matching, if it is not fully done, will probably
affect the tire pressure and make the driver unable to
control.
3. Please have replaced your tires by professional
maintenance man.
Check if each component has been tightened.
Check if the components of the motorcycle at each
location have been securely tightened before riding
the motorcycle.Refer to page 14 for tightening torque.
Lamps and signal lamps
Check the headlamp, turn signal lamps, taillight, position
lamp, stop lamp and all other indicators for their motion
operation.
Switches
Check the operation of headlamp, turn signal lamps,
stop lamp, taillight, position light, horn, starting motor
and master lock switch, etc..
Gasoline
Make sure that the fuel tank has adequate gasoline
before riding the motorcycle.
Make sure not to make gasoline overflow from the fuel
tank. Prevent gasoline from splashing and spattering
onto the engine with high temperature. When filling
gasoline, filling level should not exceed the bottom of
the filling mouth, or otherwise the gasoline will get
bloating at warm temperature and cause gasoline overflow.
This model of motorcycle uses #90 or above lead-free
gasoline and total capacity of the gasoline tank is 6.5 L
USER'S MANUAL
12
