Qlink Achille 150, User Manual, Page: 20 / 37

Item Checking contents
The initial
1000 km or
one month 3000 km
or three
months Every 3000 km
or three mon-
-thslateron
Valve clearance Check and set the valve clearance to the
specified value when the motorcycle is in
cold state.
○ ○
Spark plug Check the state, adjust the clearance,
make cleaning and replace it if
necessary.
○ ○
Air filter Make cleaning. Replace it if necessary
○ ○
Carburetor Check the engine idling speed/ starting
conditions.
And adjust it when necessary
○ ○ ○
Fuel system Check the fuel tube if it is with crackle or
blocked, replace it if necessary
○
Engine oil
Change regularly
The initial
500km
○ ○
Engine oil drain
bolt (at side )
Draining of the waste oil
○ ○ ○
Engine oil filter
screen (bottom
side)
Clean or replace if necessary
○ ○ ○
Gear oil
Change regularly Every 600 km later on
V belt Damage and attrition check, replace
it if necessary
○ ○
Front brake Check the motion and oil tube for any oil
leakage. Make corrections when necessary
○
Front and rear
brakes Check of motion state.and adjust itif
necessary
○ ○
Rear arm pivot Check of the tightness.
Make corrections when necessary
○ ○
Wheels Check of balance, extent of damage and
out of round replace it if necessary
○ ○
Wheel bearings Check of the assembly and looseness,
replace it if necessary
○ ○
Direction pole
bearing Check the tightness and adjust it when
necessary
○ ○ ○
Front fork Check the motion for oil leakage and
repair it if necessary
○ ○
Rear shock
absorber Check the motion state for oil leakage.
Replace it if necessary
○ ○
Main stand and
side stand Check the service functions, replace it if
necessary
○ ○ ○
Regular Maintenance /Lubrication Form
The initial
500km
Driver's tool
In this User's Manual, some information has been
provided for you to perform maintenance and simple
repairing work. And driver's tool provided with the
vehicle has offered you most of the tools that are required
for regular maintenance.However, other tools such as
torque spanners and so forth will be required when you
performing correctly some of the maintenance work.
When you perform maintenance and repair work for your
motorcycle but you don't have the required tools, send
your motorcycle to the dealer from whom the motorcycle
was originally purchased or the appointed maintenance
station for checking and repairing.
Check of gasoline pump
Remove the front central cover for check of the oil pump
and confirm if any oil leakage, loose of air pipe/fuel tube
at joints are found .
Gasoline pump
Note
USER'S MANUAL
16