1. Upper limit 2. Lower Limit Engine oil filler cap
2.Replacement of engine oil
a). After several minutes of pre-warming, shut down
the engine. Place an oil holder under the engine and
Oil drain bolt
D). Clean the oil filter screen and replace it if it is
damaged.
Engine oil
1.Check of oil amount:
a). Hold the motorcycle with the main stand.
When checking the oil amount, always keep the motorcycle
at vertical direction. You will not be able to read the oil
amount correctly with a leaning motorcycle body.
Before checking, wait for several minutes until the oil
level is stable.
b).
The engine oil amount should be at the position between
the upper-limit mark and lower-limit mark. When oil
amount is below the lower limit, fill engine oil until
it reaches the upper limit.
Note
Note
remove the engine oil filler
cap.
b). Remove the engine oil drain
bolt.
c). Disassemble the oil filter
screen lid to clean the filter
screen.
USER'S MANUAL
18