Inspection of brake fluid amount
When brake fluid is not enough, air will enter into the
brake system, which will cause failure of the brake.
Before riding the motorcycle, check the amount of
brake fluid first and fill brake fluid if it is not enough.
Please pay attention to the following points when checking
and refilling brake fluid:
1.When checking brake fluid amount, rotate the hand-
-lebar to make the upper end of the main brake cylinder
keep at a horizontal level.
2.Only refill the specified brake fluid, or it will damage
the rubber oil seal, which will cause leakage of brake fluid
and poor performance of the brake.
Recommended brake fluid: DOT3#
If no DOT#3 is available for use, DOT#4 can be used
3.
Use the same type of brake fluid for refilling. Mixed
brake fluid will generate chemical reaction, which will
cause poor barking performance.
4.
When refilling brake fluid, never let any water enter
into the main brake cylinder, because water will lower
the boiling point of brake fluid and thus cause air resistance
of the brake system.
5.
Brake fluid may corrode painted surface or plastic
parts. If brake fluid is splashed or sprayed, it must be
cleaned out timely and we recommend you replace it
by professionals.
6.
When the brake fluid amount is reduced, go to the
dealer from whom the motorcycle was originally
purchased or appointed maintenance station for
checking of the reason.
Wear indicator Attrition limit line
Notice
instead.
Brake fluid
amount limit line
USER'S MANUAL
24
