Tightness of
components
Check if each of the components of the
motorcycle is tightly secured, make
adjustments if necessary
○
○
○
battery
Check if the voltage is above 12.8 V,
and if the tester pointer is pointing to the
green zone .Charge the battery if necessary
○
○
Some proceduces must be check by the dealer from
whom the motorcycle was originally purchased or the
appointed maintenance station.
Engine oil of the motorcycle should be replaced after
riding of initial 500 km or after one month so as to
ensure the smooth running of the engine. And this
replacement should be done preferably by the dealer
from whom the motorcycle was originally purchased
or the appointed maintenance station.
Replacement of brake fluid:refer to page25.
When disassembling the brake master cylinder or
caliper,the brake fluid should be replaced at the same
time. And in addition brake fluid level should be checked
frequently and refilled when necessary .
Oil seal of the master cylinder or caliper should be replaced
roughly once every 2 years.
Brake oil tube should be replaced roughly once every
4 years .
And in this period instant replacement should be made
Torque specifications
Use torque spanners to lock these items tightly. And
these items should be frequently checked,especially
when having a long distance of riding, and when these
items are getting loose due to some reasons, instant
check-up should be made to these items.
A (nut)
B (bolt)
General torque specif-
-ications
·
N m (Lb Ft)
10mm(0.394in)
6 mm(0.236in)
6(4.416)
12 mm(0.472in)
8 mm(0.315in)
15(11.04)
14 mm(0.551in)
10 mm(0.394in)
30(22.08)
17 mm(0.67in)
12 mm(0.472in)
55(40.48)
19 mm(0.748)
14 mm(0.551in)
82(60.35)
22 mm(0.866in)
16 mm(0.63in)
130(95.68)
Items
Torque
Spark plug
17(12.51)
Engine oil drain bolt
23(16.93)
Engine oil filter screen lid
32(23.55)
Gear oil drain bolt
23(16.93)
Note
Note
in case of damage.
Please send to the dealer from whom the motorcycle
was originally purchased or appointed maintenance
station for replacement.
USER'S MANUAL
17
·
·
N m (Lb Ft)
·
