3. Replace and lock the crankcase oil drain bolt.
Torque for gear oil drain bolt: 23 N m(16.93Lb Ft)
4. Add gear oil
Gear oil capacity: 130mL
Recommend gear oil: SAE 85W/140 or API GL-4
gear oil
GL-4 is a quality and auxiliary parameter. "GL-5"
gear oil can also be used for replacement.
Note
USER'S MANUAL
20
.
.
5. Replace the gear oil filler lid.
6. After change of gear oil, check for any oil leakage.
Air filter
Air filter element should be cleaned regularly. If the
motorcycle is used frequently in extremely damp or
dusty places, cleaning work should be carried out more
frequently.
1. Remove the air filter cover.
2.
Take out the filter ele-
-ment assembly and then
use compressed air to clean
it, or simply replace it.
Air filter cover
Ensure that filter element has been properly installed on the
air filter. Do not run the engine before the filter element
is mounted for fear of suction of any silts, causing heavy
wear to the piston and cylinder.
Filter element holder Filter element
Notice
Maintenance for the air filter
1. Remove the filter element holder and filter element.
2.
Clean the dust on the filter element with compressed
air, or replace the filter element.
Never twist and fold the filter element, or it will get
damaged.
Ensure that the filter element is properly mounted on
the filter element holder
Adjustment of carburetor
Carburetor is an important part that affects engine
performance, which requires extremely precise adjustment.
Therefore, most of the adjusting work should be carried out
Notice
