Qiagen QIAcube Connect MDx User Manual Download

Page: 99 / 155

QIAcube Connect MDx User Manual 12/2020

The update will not work if one of the files is missing or has been renamed. Make sure that
only the files for one software version are in the main folder of the USB flash drive.

Connect the USB flash drive to the instrument using one of the USB ports at the left of the
touchscreen.

Important

: Make sure that all run reports and support packages have been backed up before

proceeding to the next step. See section 5.7, Saving run reports to the USB flash drive and
section 7.2, Creating a support package.

Press

Update Software

to start the software update. Follow the instructions on the screen.

System configuration screen

The software update tool is displayed. Press

Start update

to start the software update.

Software update tool screen

Summary of Contents for QIAcube Connect MDx




























































































































































Search results

Summary of Contents for QIAcube Connect MDx

Reviews:

Related manuals for QIAcube Connect MDx

Brands by name

Popular brands

Qiagen QIAcube Connect MDx, User Manual

Search results

Summary of Contents for QIAcube Connect MDx

Reviews:

Related manuals for QIAcube Connect MDx

Brands by name

Popular brands