AS40 Conveyors | Installation & Maintenance Instructions
17
Belt Change
u
Removal of Existing Belt
2
x
2
x
1
Simultaneously push in both
buttons to disengage locking
mechanism.
(Frame end could have
sharp edges)
2
Rotate tension release tail
assembly up and towards the
drive end.
3
Loosen screws on mounts/
brackets on opposite side
of drive.
4
Remove screws from stand
brackets or mounts. (if stand
brackets are not used, proceed to
step 7)
2
x
5
Loosen screws on stand. (Do
not remove)
6
Slide stand bracket down for
clearance.
7
Slide belt sideways to clear
drive pulley bearing plate.
8
Pull belt off of tension
release tail.
To see a video of this process, scan this code on
your phone or tablet. You may also visit
http://bit.ly/as40belt
