AS40 Conveyors | Installation & Maintenance Instructions
15
u
Heavy Duty Top/Bottom Drive Mounting Packages (continued)
3
x
4
x
13
Retighten three socket
head cap screws.
14
Replace guard.
15
Insert and tighten four
socket head cap screws.
u
Install Heavy Duty Motor to Speed Reducer
1
Remove ring holding key in
place.
2
Remove and discard key that
is included with motor.
3
Install Leeson speed reducer
key to keyway on motor.
4
Lightly strike just behind the
key with a screwdriver and
hammer.
5
Rotate keyway on motor to
12 o’clock position.
6
Remove plug from speed
reducer.
7
Rotate quill pin on speed
reducer so that keyway is in
12 o’clock position.
8
Apply anti-seize compound to
speed reducer input quill and
motor shaft.
4
x
4
x
9
Install motor onto speed
reducer.
10
Rotate motor so workbox
is in desired position.
11
Install 4 hex head screws.
12
Tighten 4 hex head
screws to secure.
