22
AS40 Conveyors | Installation & Maintenance Instructions
u
Tail Pulley Replacement
1
Press both tension release
buttons and lift up simultane-
ously.
2
Lift idler pulley out of slot.
3
Remove Idler pulley from
conveyor.
4
Replace with new idler pulley.
5
Making sure to keep dog
point of set screw facing
down, insert idler pulley back into
slot.
6
Press Tension Release tail
pulley down until it “Locks“
into the locked position.
>
Re-tensioning and tracking of belt may be necessary. (Refer to tracking and tensioning sections of this manual.)
Recommended Spare Parts
u
Parts List
Part #
Description
1A0039B00WW
Tail Assembly
AE4-WW-LLL-MAE
White Urethane Belt (MVE for V-Guided)
1A0102C
Drive End Bearing Housing LH
1A0103C
Drive End Bearing Housing RH
1A0033A00WW
Underside Idler Roller Full Width
1A0036A
Underside Idler 2"- 6" Wide Stub Roller
1A0037A
Underside Idler 8" - 24" Wide Stub Roller
C-0117-090
Drive Timing Belt (090 for ≤ 50 Sprocket teeth, 100 for ≥ 52 sprocket teeth)
1A0099C00WW
Single Output Drive Pulley and Bearing Assembly
1A0100C00WW
Dual Output Drive Pulley and Bearing Assembly
>
Use the two digit width of the conveyor for “WW”.
Use the width and 3-digit length of the conveyor for “LLL”.
>
To order parts, please visit QCconveyors.com/serial or call us at +1 (513) 753-6000
.
