16
AS40 Conveyors | Installation & Maintenance Instructions
Maintenance
Belt Tracking
>
For best results, make adjustments to only one side.
u
Belt Tracking at Drive End
3
x
3
x
1
Loosen three driver assembly
screws on each side of bear-
ing block.
2
With conveyor running, rotate
square head tracking screw
toward drive pulley on side where
belt is riding too close.
3
Let conveyor make several
rotations to ensure belt is
tracking properly.
4
Retighten driver assembly
screws. (Three on each side)
The Drive End is tracked when the belt can make a full revolution without contacting either bearing plate.
u
Belt Tracking at Tail End
1
Rotate adjustment screw to
move tail on side where belt
is riding too close.
2
Let belt make several
rotations to ensure proper
tracking.
Tail End is tracked when belt can make a full revolution without contacting either side of frame.
To see a video of this process, scan this code on
your phone or tablet. You may also visit
http://bit.ly/as40tracking
