18
AS40 Conveyors | Installation & Maintenance Instructions
u
Installation of New Belt
>
If stand brackets are not being used, skip steps 3 & 6.
2
x
1
Starting at tail end, loop
belt over frame and tension
release tail assembly.
2
Loop belt around conveyor
frame towards drive end.
3
Slide frame bracket up to
engage conveyor frame.
4
Insert screws through bracket
or mount used and into
frame’s drop in nuts.
2
x
2
x
5
Tighten screws.
6
Tighten screws on stand.
7
Rotate tension release tail
assembly down and into the
locked position.
(Frame end could
have sharp edges)
Conveyor is now ready to be tracked. See belt tracking section of manual.
