14
AS40 Conveyors | Installation & Maintenance Instructions
u
Heavy Duty Top/Bottom Drive Mounting Packages
The Drive Package will ship separate from the conveyor. For Heavy Duty Drives, the motor is always shipped in its own box; the right angle speed reducer will be attached to the
drive mounting package.
4
x
3
x
1
Remove and discard three
socket head cap screws from
drive side bearing plate. (Do not
remove bearing plate)
2
Remove four socket head
cap screws from guard and
remove guard.
3
Mount drive package over
drive mounting plate.
4
Align mounting holes and
install three socket head
screws.
3
x
2
x
5
Tighten three socket head
screws.
6
Remove nylon tape holding
key in place (do not remove
key).
7
Slide top sprocket onto con-
veyor‘s output shaft and key.
8
Tighten set screws to secure
in place.
3
x
9
Loosen three socket head
cap screws holding speed
reducer in position.
10
Tighten jacking screw so
speed reducer can move
toward conveyor.
11
Install timing belt over
sprockets.
12
Run square head screw
out, moving speed
reducer away from conveyor and
creating tension on belt.
