q-Tech QSW-9010, Cli Configuration Manual

Page: 64 / 101

User Manual
6. QoS service configuration 64
www.qtech.ru
When the PON port is a simple scheduling mode, before scheduling for downlink queue, the
scheduling policy should be configured at the exit, i.e. PON port.
Note:
PON port is hierarchical scheduling mode, this attribute is not valid, and can not be modified
OLT (config) # interface gpon-olt 1/1
OLT (config-gpon-olt1 / 1) # qos-queue-scheduler 1
When the PON port is hierarchical scheduling mode, the queue scheduling policy should be
configured in ONU before having the downlink queue scheduling for ONU
Note:
PON
port is simple scheduling mode, this attribute is not valid, and can not be modified
OLT (config) # interface gpon-onu1 / 1: 1
OLT (config-gpon-onu1 / 1: 1) # qos-queue-scheduler 1
Restore the default queue scheduling policy
OLT (config) # interface xe1 / 1
OLT (config-xe1 / 1) # qos-queue-scheduler default
OLT (config) # interface gpon-olt 1/1
OLT (config-gpon-olt1 / 1) # qos-queue-scheduler default
Note:
PON port is hierarchical scheduling mode, the property does not take effect, and can not be modified
OLT (config) # interface gpon-onu1 / 1: 1
OLT (config-gpon-onu1 / 1: 1) # qos-queue-scheduler default
Note:
PON port is simple scheduling mode, the property does not take effect, and can not be modified
Query the quque scheduling policy that the message uses at the port, this command is used to view
the qos-queue-scheduler profile in the uplink port, PON port and ONU:
OLT (config) # show cos-queue-map interface xe1 / 1
qos-queue-scheduler default
OLT (config) # show cos-queue-map interface gpon-olt 1/1
qos-queue-scheduler default
View the queue scheduling policy in ONU:
OLT (config-gpon-onu1 / 1: 1) # show qos-queue-scheduler interface
gpon-onu1 / 1: 1
qos-queue-scheduler default