q-Tech QSW-9010, Cli Configuration Manual

Page: 35 / 101

User Manual
4. Unicast service configuration 35
www.qtech.ru
Description:
The current maximum number of MAC that can be configured by OLT is 8000;
4.1.3. Static MAC
When you need to access a device with a specified MAC address on the port, configure the VLAN +
static MAC address on the port, or configure the static MAC address for the service stream. The
system forwards the data directly according to the static MAC
GPON (config) # mac-address static 0001-0003-0005 vlan 10 interface
xe1 / 1
4.2. VLAN configuration
Creating VLAN is the basis for configuring VLAN and service, and to make sure that VLAN has been
created in accordance with the actual plan before proceeding with the VLAN configuration.
Note:
>>The VLAN is 1 by default, and can not be deleted.
>>Multicast downlink VLAN 4095
4.2.1. Configure the uplink port and VLAN planning
4.2.1.1. The uplink mode configuration
OLTQSW-9010 (config) # uplink-mode
ge uplink 8 ge port
xe uplink 2 xe port
Note:
QSW-9010- supports 2*10GE or 8*GE, OLT needs to be restarted if you want to change the uplink
mode. The default is 8*GE mode.
4.2.1.2. The uplink port VLAN attributes configuration
In the uplink interface configuration mode, configuration port supports two modes: trunk (hybrid)
and access.
Trunk mode:
OLT (config) #interface xe1 / 1
OLT (config-xe1 / 1) #switchport mode trunk
OLT (config-xe1 / 1) #switchport trunk tag 100-200
OLT (config-xe1 / 1) # switchport trunk untag 300
Access mode:
OLT (config-xe1 / 1) #switchport mode access