q-Tech QSW-9010, Cli Configuration Manual

Page: 90 / 101

User Manual
10. Uplink port LAG service Configuration 90
www.qtech.ru
Configure dynamic trunk VLAN and negotiating rates.
OLT (config) # interface xe1 / 1
OLT (config-xe1 / 1) # no shutdown
OLT (config-xe1 / 1) # speed 1000
OLT (config-xe1 / 1) #duplex full
OLT (config-xe1 / 1) # switchport mode trunk
OLT (config-xe1 / 1) # switchport trunk tag 200
OLT (config) # interface xe1 / 2
OLT (config-xe1 / 2) # no shutdown
OLT (config-xe1 / 2) # speed 1000
OLT (config-xe1 / 2) #duplex full
OLT (config-xe1 / 2) # switchport mode trunk
OLT (config-xe1 / 2) # switchport trunk tag 200
View trunk state:
OLT (config) # show trunk verbose
Flags: A - LACP_Activity, B - LACP_timeout, C - Aggregation,
D - Synchronization, E - Collecting, F - Distributing,
G - Defaulted, H - Expired System ID: 60e6-bc00-34f5 System
priority: 32768
Trunk 17: 2 ports, Dynamic, PSC: src-mac
Local:
Port Status Priority Oper-key Flag Link-Status
-------------------------------------------------
xe1 / 2 S 32768 3 ABCDEF UP
xe1 / 1 S 32768 3 ABCDEF UP
Remote:
Actor PartnerPriority Oper-key System-Id
----------------------------------------------
xe1 / 2 32768 305 20f1-7ce9-1160
xe1 / 1 32768 305 20f1-7ce9-1160
(Optional) View BCM's internal trunk group
OLT (config) # bcm trunk show