q-Tech QSW-9010, Cli Configuration Manual

Page: 66 / 101

User Manual
6. QoS service configuration 66
www.qtech.ru
OLT (config-gpon-olt1 / 1) # show profile qos-queue-traffic
profile qos-queue-traffic 1 name 1 queue0 1-1 queue1 1-1 queue2
1-1 queue3 1-1 queue4 1-1 queue5 1-1
queue6 1-1 queue7 1-1
profile qos-queue-traffic 2 name 2 queue0 10-1000000 queue1 10-
100000 queue2 10-10000 queue3
10-1000 queue4 10-100 queue5 10-10 queue6 0-1 queue7 0-0
profile qos-queue-traffic 3 name 3 queue0 0-1000000 queue1 0-
100000 queue2 0-10000 queue3 0-1000
queue4 0-500 queue5 0-250 queue6 0-200 queue7 0-100
profile qos-queue-traffic 4 name 4 queue0 10-1000000 queue1 10-
100000 queue2 10-10000 queue3
0-1000 queue4 0-500 queue5 10-250 queue6 10-200 queue7 10-100
OLT (config-gpon-onu1 / 1: 1) # show profile qos-queue-traffic
profile qos-queue-traffic 1 name 1 queue0 1-1 queue1 1-1 queue2
1-1 queue3 1-1 queue4 1-1 queue5 1-1
queue6 1-1 queue7 1-1
profile qos-queue-traffic 2 name 2 queue0 10-1000000 queue1 10-
100000 queue2 10-10000 queue3
10-1000 queue4 10-100 queue5 10-10 queue6 0-1 queue7 0-0
profile qos-queue-traffic 3 name 3 queue0 0-1000000 queue1 0-
100000 queue2 0-10000 queue3 0-1000
queue4 0-500 queue5 0-250 queue6 0-200 queue7 0-100
profile qos-queue-traffic 4 name 4 queue0 10-1000000 queue1 10-
100000 queue2 10-10000 queue3
0-1000 queue4 0-500 queue5 10-250 queue6 10-200 queue7 10-100
Take effect of qos-queue-traffic profile, the command is used in uplink port, PON port current qos-
queue-traffic profile.
When it is necessary to have rate limitation on the uplink queue, the queue bandwidth configuration
will be at the exit, i.e. the uplink port, for example:
OLT (config) # interface xe1 / 1
OLT (config-xe1 / 1) # qos-queue-traffic 1
When the PON port is simple scheduling mode, before downlink queue scheduling the queue
bandwidth should be configured at the exit, i.e. the PON port (Note:
PON port for hierarchical
scheduling model, this property is not valid, and can not be modified), for example:
OLT (config) # interface gpon-olt 1/1
OLT (config-gpon-olt1 / 1) # qos-queue-traffic 1