q-Tech QSW-9010, Cli Configuration Manual

Page: 32 / 101

User Manual
3. Remote ONU function configuration 32
www.qtech.ru
ONU version delete:
OLT # delete onuversion VERSION
Update the ONU version, manual upgrade can only update the current working status of operational
ONU, the upgrade process to ensure that the ONU state is normal:
OLT # cpe update tclinux.bin gpon-olt1 / 4 onuid 1
View ONU version:
OLT # show cpe information gpon-olt1 / 5 onuid 2
View the upgrade status. There are three update states of downloading, ONU, writing, disk and
update success during the upgrade process :
OLT # show cpe update-status gpon-olt1 / 5 onuid 2
Send commit, ONU will switch to partition version:
OLT # cpe commit gpon-
olt1 / 5 onuid 1
Version activate the ONU, ONU Will automatically restart:
ONU will automatically restart if configuring ONU version as “activate”:
cpe activate gpon-olt1 / 5 onuid 1
When the upgrade is complete, the ONU re-authenticate and becomes operational, and you can see
that the version of ONU has been updated:
OLT # show cpe information gpon-olt1 / 5 onuid 2
3.14. ONU manage-ip
If there is an EOC (Ethernet Over Cable) device, need to configure and manage the IP sending from the
OLT, jumping to the EOC equipment and configure the service of ONU under it.
OLT # config terminal
VLAN Configuration management and VLAN interface address management:
OLT (config) #vlan 101
OLT (config-vlan101) # exit
OLT (config) # interface vlanif101
OLT (config-vlanif101) # ip address 11.0.0.1/24
The ONU management IP configuration:
OLT (config) # interface gpon-onu 12/4: 1
OLT (config-gpon-onu12 / 4: 1) #tcont 1 profile 1200 OLT (config-
gpon-onu12 / 4: 1) #gemport 1 tcont 1
OLT (config-gpon-onu12 / 4: 1) # service-port 1 gemport 1 user-vlan
101 vlan-add 101 OLT (config-gpon-onu12 / 4: 1) #remote service 1
gem 1 vlan 101
OLT (config-gpon-onu12 / 4: 1) #remote uni eth_1 / 1 vlan-mode
transparent