q-Tech QSW-9010, Cli Configuration Manual

Page: 22 / 101

User Manual
2. Basic service configuration 22
www.qtech.ru
2.1.3. The ONU Configuration
Step 1. No shutdown PON port:
QSW-9010(config) # interface gpon-olt 1/1
QSW-9010(config-gpon-olt1 / 1) # no shutdown
View PON port status:
QSW-9010(config) # show interface gpon-olt1 / 1
QSW-9010-08# show interface gpon-olt1/1
gpon-olt1/1 : up
Hardware address : 60e6-bc00-645f
Media type : MEDIUM_FIBER
loopback : NONE
Autonegotiation : enable
Flow control transmit : on recieve: on
Speed : 2500 Duplex-full
Max frame size : 12284
Ifindex : 0x9010001
Port link-type : access
PVID : 1
RxPackets : 0
RxBytes : 0
RxBcast : 0
RxMcast : 0
RxPause : 0
RxInjabber : 0
RxErrors : 0
RxCRCErrors : 0
RxDrops : 0
TxPackets : 2318952
TxBytes : 253942230
TxBcast : 2174778
TxMcast : 116808
TxPause : 0
TxCollision : 0
TxErrors : 0
TxDrops : 0
Step 2, when ONU automatic discovery function is disable, check unauthenticated ONU:
QSW-9010(config) # show onu unconfig
QSW-9010-08# show onu unconfig
gpon-olt onu-index info
Total: 0
Step 3, add the corresponding ONU:
QSW-9010 (config) # interface gpon-olt 1/1
QSW-9010 (config-gpon-olt1 / 1) # onu 2 type onu-4fe sn
QTEC001f28ca
Step 4, add ONU status:
QSW-9010 (config-gpon-olt1 / 1) # show onu status