q-Tech QSW-9010, Cli Configuration Manual

Page: 61 / 101

User Manual
6. QoS service configuration 61
www.qtech.ru
0
Viewing configured Profile:
OLT (config-gpon) # show profile cos-queue-map
profile cos-queue-map 1 name 1 cos0 0 cos1 0 cos2 0 cos3 0 cos4 0
cos5 0 cos6 0 cos7 0
profile cos-queue-map 2 name 2 cos0 0 cos1 1 cos2 2 cos3 3 cos4 4
cos5 5 cos6 6 cos7 7
profile cos-queue-map 3 name 3 cos0 7 cos1 6 cos2 5 cos3 4 cos4 3
cos5 2 cos6 1 cos7 0
Description:
Cos-queue-map can be configured in the PON and uplink port, and is not supported to configure service
cos-queue-map at ONU side.
Binding Profile:

Uplink message profile binding on PON port
OLT (config) # interface gpon-OLT 1/1
OLT (config-gpon-olt1 / 1) # cos-queue-map 1

Downlink message profile binding on uplink port.
OLT (config) # interface xe1 / 1
OLT (config-xe1 / 1) # cos-queue-map 1
Description:
When the PON port is a hierarchical scheduling mode, this attribution does not work.
Restore the default mapping relation between the internal priority and the queue for message
scheduling:
Uplink message profile binding in PON port, and restore to the default mapping.
OLT (config) # interface gpon-OLT 1/1
OLT (config-gpon-olt1 / 1) # cos-queue-map default
Downlink message profile binding in uplink port, and restore to the default mapping.
OLT (config) # interface xe1 / 1
OLT (config-xe1 / 1) # cos-queue-map default
The downlink message that is configured in ONU straightly enter the queue.
OLT (config) # interface gpon-onu1 / 1: 1
OLT (config-gpon-onu1 / 1: 1) # service-port 1 queue 1
Description: