User Manual
4. Unicast service configuration
36
www.qtech.ru
OLT (config-xe1 / 1) #switchport access 100
Note:
When the uplink interface VLAN is configured, the system will automatically create the corresponding
VLAN
4.2.1.3.
The uplink port rate configuration
The OLT has two 10G uplink ports, which can be configured as a 1G. The uplink ports stay in
"shutdown" state by default, which need to be enabled and configured with corresponding rate
manually. The configuration is as follow:
OLT (config) #interface xe1 / 2
OLT (config-xe1 / 2) #no shutdown
OLT (config-xe1 / 2) #speed 1000
Note:
OLT supports GE/10GE optical module, does not support the 10/100/1000 adaptive transceiver.
4.2.1.4.
Uplink portrate Limiting
OLT
support
uplink
rate
limiting
to
set
the
port
service
rate
and
flow.
Use
this
command
when you
need to set the specified port packet at a specified
rate.
OLT (config-xe1 / 1) # rate-limit 1000 2000 egress // speed up
OLT (config-xe1 / 1) # rate-limit 1000 2000 ingress // speed
downlink
Note:
The
first
value
is
the
limited
rate
in
kbps;
the
second
is
peak
Burst
value
in
kbit.
When
the
two value is
configured as 0, there will be no rate limit. The concept of Burst is different from RFC2697, 2698, 4116
in the token bucket. When the rate limit is <10Mbps, burst size is configured
as
a
10~1000;
when
the
rate
limit
is
>10Mbps,
the
burst
size
configuration
is
2000, otherwise
there
will
be
a
problem
of
rate
limiting
accuracy.
4.2.1.5.
MAC address learning limit
This command is to configure the largest dynamic MAC address entry on the port. Use this command
when necessary to restrict the number of user access for a virtual port service.
When the maximum dynamic MAC address entry of the port is configured successfully, the port will
no longer learn the new MAC address after the learned MAC address reaches this value.
OLT supports MAC address learning limit, up to 8K MAC addresses.
OLT (config-xe1 / 1) # mac-address limit 8000
(Optional) MAC address View command:
OLT (config) # show mac-address
Mac Vid Interface Type
Summary of Contents for QSW-9010
Page 1: ...USER MANUAL www qtech ru QSW 9010 CLI Configuration user manual QSW 9010...
Page 23: ...User Manual 2 Basic service configuration 23 www qtech ru...
Page 71: ...User Manual 6 QoS service configuration 71 www qtech ru...
Page 96: ...User Manual 12 Port statistics and PM statistics 96 www qtech ru...
