Fades & Masks
This dialogue contains certain global settings. Access it by going to
Options View
and select
Fades &
Masks
. The global settings are:
Intensity reset after capture released: This is the time it takes for the intesity of a captured device to
rematch the HTP value after
[Free]
has been pressed.
Default mask for a new step or memory: This sets the default in
Memory View / Customise Memory
and
Sequence View / Step Options / Customise Step
Remember Previous
This dialogue contains an extension of the strickt LTP (last take precedence) principle in Ray Console
software. If the
Remember Previous
Button is activated (framed green) all attribute values (except
intensity) which are set by the faders are recorded in the LTP stack. If the fader, that caused a LTP
attribute value to be set, is returned to zero, then the previous attribute value is set. For sequences, the
current step and next step are included in the stack during a crossfade. The current step is the bottom of
the stack, so when the sequence progresses, then all entries before the current step are removed. Pressing
Back completely resets the stack.
Settings
•
Changing Language
•
Lock Console
•
Submasters
•
Loading Shows
•
Network
•
Patching
•
User Account
•
What is the difference between an owner and user settings account?
•
Settings Access Profiles
65
