calculated pan and tilt values are shown in degrees as well as a small graphic. To get the very last little
adjustment perfect use the fine control.
Position Faders
The Position Fader is used to set the Pan and Tilt Attributes of a Moving Head.
The Position Fader shows:
•
The name of the fader
•
The current fader value in percent
•
A scroll bar showing for setting the position values
The Faders can be dragged to new position on the screen. You can tap anywhere on the bar, this will
change the value of the fader. Taping on the name of the fader changes the value in three steps: first to
50%, then to 100%, then to 0% and so on. If the current fader is already above 50% then the value is to
100%. To change the value in percentage you tap on the number of percentage, the numeric keyboard
opens, now enter a percentage (accurate to 2 decimal places).
31
