Lock Console
If you have to leave the console alone for a while and you want to make sure nobody changes anything
they shouldn't, then go to
Settings View
and select
Lock Console
. When the console is locked, the touch
screen is blocked, all buttons and faders are disabled, however the DMX will continue to output
constantly. Any user can easily unlock the console by selecting their account and using their password,
just as when signing into settings.
Network
Select
Network
to connect to a WiFi network, set a static ip-address or setup ArtNet. You can connect the
console to rayconsole.com via an Ethernet cable or using WiFi.
To connect to rayconsole.com via an Ethernet cable, simply plug the cable into the back of the console
(labeled Ethernet). The console should connect automatically. You can check the connection by going to
Settings View / Network / Ethernet
where you will see the IP-address listed and the green pulsating dot
if connected. If required, you can also set a static IP-address by selecting
Advanced
, then
Static
and
entering the relevant details.
To connect to rayconsole.com using WiFi, go to
Settings / Network / WiFi.
To turn on WiFi tap the
WiFi
button, which turns the button text green and scans for available networks. Next select the network with
which you wish to connect, enter the network password (if necessary) and select connect. The name of the
connected WiFi network will go green and a pulsating dot will appear next to WiFi on the right hand
menu. If required, you can also set a static IP-address by selecting
Advanced
, then
Static
and entering
the relevant details.
NOTE: It is not possible to connect to enterprise networks that require both a username and password to
connect. Please contact
for more information.
69
