Pulsar Measurement Ultra 3, Instruction Manual

Page: 172 / 179

ULTRA 3 INSTRUCTION MANUAL
172
P146 Tel. No2
This parameter is used to enter the next 6 digits, following the ‘0’s, of the
telephone number to be dialled. If there are less than 6 digits following the
‘0’s, then just enter the digits required, if there are more than 6 digits
following the ‘0’s then enter the first 6 digits and then proceed to P147 to
enter the remainder.
P147 Tel. No3
This parameter is used to enter any remaining digits of the telephone
number to be dialled after completion of P145 and P146 above.
Example
Telephone number to be dialled is: 0 1234 123456
P145 Tel. No. 1 = 1 (One ‘0’ at the beginning of the telephone number)
P146 Tel. No. 2 = 123412 (The next 6 digits following the ‘0’s).
P147 Tel. No. 3 = 3456 (Remaining digits of telephone number).
P148 Timed Out
This parameter will set the time period that the unit will wait for a reply
before disconnecting.
Default = 90 seconds
P149 Retry No.
This parameter will set the number of times the telephone number will be
re-
dialled if no reply is received. If set to ‘0’ then the number will be re -
dialled continually until a reply is received, if set to ‘ - 1’ the n the number will
not be re-dialled at all. Any other value entered between 1 and 99 will
determine the number of re-dials to be attempted.
Default = 0