Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
D-25
Appendix D: Teklogix Imagers Applet
Bar Code Symbologies – Descriptions
Options
Adding, Editing and Removing Triggers
For instruction about adding, editing and removing triggers, refer to “Manage Triggers” on
page 104.
D.5
Bar Code Symbologies – Descriptions
To
view
all symbologies available for the imager:
•
Tap on the
Barcoding
tab, and tap on
All
.
D.5.1
Options
Auto Retry On Failed Decode Enabled
Setting this parameter to
on
allows the imager to repeat the image capture attempt if the
initial attempt fails. The number of retries is dependent on the value assigned in the next pa-
rameter,
Max Number of Auto Retry
. If this parameter is set to
off
, the imager will only
attempt the image capture once.
Note: Remember that if you want to
edit
the symbologies, the preset you want to
change must be active. Highlight the
preset
you want to edit, and tap on the
Activate
button – an
A
is added at the far right of the preset. With the activated
preset highlighted, double-tap on the
Edit
button.
