Chapter 5: Configuration
Device Tab
Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
129
Pair
begins the pairing process by inquiring the services and profiles of the discovered
device. An
authentication
dialog box is displayed the first time a
Bluetooth
device is paired.
Refresh Name
repeats the device name inquiry, updating the name. This command is useful
if a device is listed without a name (unknown), or if a device name has been changed
remotely.
Delete
removes this device from the list.
5.6.2.4 Pairing a Device
To pair devices:
•
Follow the manufacturer’s instructions to place the remote device in pairing mode.
•
Choose the
Devices
tab and
Scan
for devices in your area.
•
When the scan is complete, tap on the
device
to which you want to pair.
•
In the pop-up
Device
menu, tap on
Pair
.
An
Authentication
dialog box is displayed.
•
If the remote device has authentication enabled, type the PIN in this dialog box.
•
To proceed
without
authentication, tap on
Next
.
After entering the device
PIN
, the
Services
dialog appears with a list of services available for
that device.
