Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
D-27
Appendix D: Teklogix Imagers Applet
Bar Code Symbologies – Descriptions
Trioptic Code
part of the code, the code is not output. Keep in mind the parity character may not be part of
your output setup; in this case, this parameter should be turned
off
.
Check Char Strip
If this parameter is set to
on
, check characters – if present – are not output.
Concatenation
When
Concatenation
is set to
on
, all decoded “Code 39” symbols with a SPACE as the first
data character are concatenated to the internal buffer. Data from the last “Code 39” symbol
without
a SPACE is added to the buffer as well, and the entire buffer will be output.
Pharmaceutical
This is a numeric (0-9) fixed length barcode used by Italian pharmacies. It is also referred to
as Code 32 Pharmacode and is a form of Code 39.
Minimum and Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays screens in which you
can set the minimum and maximum allowable code lengths –
0 to 48.
D.5.3
Trioptic Code
Enable
Trioptic Code
symbols always contain six characters. Setting this parameter to
on
allows
this type of symbology to be recognized.
D.5.4
Code 128
Enabled
Set this parameter to
on
to enable “Code 128”.
ISBT Concatenation
These codes are not concatenated by default. You need to set this parameter to
on
to send
concatenated code.
Note: “Trioptic Code” and “Full ASCII” should not be enabled simultaneously. The scan-
ner does not automatically discriminate between these two symbologies.
