Chapter 2: Basic Operation
Wi-Fi Config: Advanced Tab
Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
29
2.8.4
Wi-Fi Config: Advanced Tab
Use Windows to configure my wireless settings
In the
Advanced
tab you can set Windows to configure the radio, using
Wireless Zero
Config
.
•
Tap on the checkbox to the left of
Use Windows to configure my wireless settings
to
enable this option.
Power Save Mode
This allows you to set the 802.11 power saving mode of the radio to:
CAM
(continuous ac-
cess—always on) (recommended); or
MAX_PSP
(maximum power saving mode).
Roaming - RSSI Threshold
This sets the RSSI threshold value, below which the radio will start scanning for new access
points when roaming. Values range from
-55 to -90 dBm
.
Roaming - AP Delta
This sets how much greater (in dBm) the RSSI of a new access point must be than the RSSI
of the currently associated access point in order for the hand-held to initiate a roam. Values
range from
5 to 30 dBm
.
Concluding the Wi-Fi Configuration
If you’ve made changes in the Advanced menus, you will need to warm reset your Omnii.
•
Choose
Start>Shutdown>Warm Reset
.
Tap here to add a checkmark
to activate the Windows radio
configuration.
