background image

D-30

Psion Teklogix Omnii XT10 Hand-Held Computer User Manual

Appendix D: Teklogix Imagers Applet

Bar Code Symbologies – Descriptions
UPC-E Settings

D.5.8

UPC-E Settings

Enabled

Set this parameter to 

on

 to enable “UPC E”.

Enabled UPC-E1

Set this parameter to on to allow “UPC-E1” (zero suppressed) bar code scans.

Expand 

This parameter expands the UPC-E code to a 12 digit UPC-A format.

Check Digit Strip

If you enable this parameter, a check digit is stripped from the decoded bar code data.

Number System

If this parameter is enabled, the number system digit is transmitted with the decoded bar 
code data.

Supplements 2 and Supplements 5

Supplements

 are additions to EAN/UPC codes. These addendums can be 2 or 5 characters in 

length. Usually, data from an addendum is a suffix to the main symbol output data.

Mandatory Enabled

When this parameter is set to 

on

, the imager does not accept the main bar code without a 

supplement.

Supplements Separator

Supplements Separator

 is a space that is added between the UPC-E bar code and the Supple-

ment code/Addenda.

D.5.9

UPC/EAN Shared Settings

Extended Coupon Code

This parameter specifies whether or not the imager will read only UPC-A/EAN-13 bar 
codes that have addenda. 

Note: The 2 or 5 digit addenda must be turned on/off, depending on the desired behavior.

Summary of Contents for Omnii XT10







































































































































































































































































































































































Reviews: