Chapter 5: Configuration
Bar Codes Tab
150
Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
5.12.1 Bar Codes Tab
5.12.1.1 Scanner
The drop-down menu to the right of the
Scanner
option allows you to choose configurations
for one of the following scanner types, depending on what is installed in/on your hand-held:
Decoded
(internal),
Decoded
(Intermec ISCP),
Imager
and
Non-decoded
.
The symbologies listed in the
Barcodes
tab change to reflect the scanner you choose and the
bar codes it supports. Always defer to your bar code scanner’s programming manual when
in doubt about the availability or settings for any parameter.
Keep in mind that some bar code types are only available when an internal imaging scanner
is installed. All internal scanners can be configured using these dialog boxes.
5.12.1.2 Restoring Default Settings
If you want to restore the factory defaults after making changes, the defaults can be applied
to a selected parameter, sub-tree of parameters or all scanner parameters.
Note: Your Omnii comes preconfigured from the factory for internal scanner types. The
type of scanner installed can be determined from the
System
icon in the Control
Panel, under the System Properties tab.
Important: To improve the decode speed and performance, enable (set to ‘on’) only
those codes that are required by the application.
For information on configuring the bar code symbologies, see Appendix C:
