D-28
Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
Appendix D: Teklogix Imagers Applet
Bar Code Symbologies – Descriptions
EAN 13
Minimum and Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays screens in which you
can set the minimum and maximum allowable code lengths –
0 to 80.
D.5.5
EAN 13
Enabled
Set this parameter to
on
to enable “EAN 13”.
Check Digit Strip
If you enable this parameter, a check digit is stripped from the decoded bar code data.
Supplements 2 and Supplements 5
Supplements
are additions to EAN/UPC codes. These addendums can be 2 or 5 characters in
length. Usually, data from an addendum is a suffix to the main symbol output data.
Mandatory Enabled
When this parameter is set to
on
, the imager does not accept the main bar code without a
supplement.
Supplements Separator
A
Supplements Separator
is a space that is added between the EAN 13 bar code and the
Supplement code/Addenda.
ISBN Translate
When this parameter (International Standard Book Number) is enabled, the first 3 characters
(‘978’) are ignored and the checksum (0.9, ‘X’) is calculated on the remaining characters.
D.5.6
EAN 8
Enabled
Set this parameter to
on
to enable “EAN 8”.
Check Digit Strip
If you enable this parameter, a check digit is stripped from the decoded bar code data.