PSC LazerData Series 9000E, Installation And Operation Manual

Page: 57 / 104

LOCAL FORMATTING
5-21
TRANSMIT ON ALL NOREADS - User can determine whether a data
transmission will (YES) or will not (NO) be made when a No Read
condition occurs in ALL fields. TRANSMIT ON ANY NOREAD must be
set to YES.
TRANSMIT ON NO COMPARE - User can determine whether a data
transmission will (YES) or will not (NO) be made when a No Compare
condition occurs.
TRANSMIT ALGORITHM ID - User can determine if the Algorithm ID
will be part of the serial transmission. Will not transmit when multiple
fields have been selected.
TRANSMIT READ DIRECTION - User can determine if direction of bar
code read (FWD = Forward, REV = Reverse) is transmitted. Will not
transmit when multiple fields have been selected.
START OF MESSAGE STRING - User may select any character string
to signify the beginning of each data transmission. The length can be up
to 10 characters. If control characters are included they must be
bracketed, < >. For example: <STX>.
END OF MESSAGE STRING - User may select a string of characters to
signify the end of each data transmission. The length can be up to 10
characters. Default string is <CR><LF> (carriage return, line feed).
GOOD COMPARE STRING - User may select a string of characters to
be transmitted to signify a Good Compare. Default is GC. Maximum
length is 60 characters.
NO COMPARE STRING - User may select a string of characters to be
transmitted to signify No Compare. Default is NC. Maximum length is
60 characters.
SCANNER ID STRING - User may select a character string to identify
the scanner sending the message. In an installation with multiple
decoders connected to a host, this identification string may be
necessary. Maximum length is 10 characters.