PSC LazerData Series 9000E, Installation And Operation Manual

Page: 62 / 104

Series 9000E Scanner/Decoder
5-26
COM DATA BITS - The number of data bits per character can be 7 or 8.
COM STOP BITS - The number of stop bits per character can be 1 or 2.
COM SOFTWARE PROTOCOL - Software protocols may be specified if
desired. Choices are NONE or XON/XOFF.
COM ECHO/PASS THROUGH - Each transmission received on this port
can be echoed (repeated) to another port. The choices are NO ECHO,
HOST, LOCAL, or BOTH. Selecting NO ECHO will not echo any
transmission. Selecting HOST will re-transmit the input signal on this
port to the output on the HOST port. Selecting LOCAL will echo the
input signal on this port to the output on the local port. Selecting BOTH
will echo the input signal on this port to the output on both ports.
TRANSMIT ON ANY NOREAD - User can determine whether a data
transmission will (YES) or will not (NO) be made when a No Read
condition occurs in ANY field. GOOD READ BASED ON must be set to
“ALL FIELDS”.
TRANSMIT ON ALL NO READS - User can determine whether a data
transmission will (YES) or will not (NO) be made when a No Read
condition occurs in ALL fields. TRANSMIT ON ANY NOREAD must be
set to YES.
TRANSMIT ON NO COMPARE - User can determine whether a data
transmission will (YES) or will not (NO) be made when a No Compare
condition occurs.
TRANSMIT ALGORITHM ID - User can determine if the Algorithm ID
will be part of the serial transmission. Will not transmit when multiple
fields have been selected.
TRANSMIT READ DIRECTION - User can determine if direction of bar
code read (F = Forward, R = Reverse) is transmitted. Will not transmit
when multiple fields have been selected.
START OF MESSAGE STRING - User may select any character string
to signify the beginning of each data transmission. The length can be up
to 10 characters. If control characters are included they must be
bracketed, < >.