PSC LazerData Series 9000E, Installation And Operation Manual

Page: 46 / 104

Series 9000E Scanner/Decoder
5-10
MASTER/SLAVE MODE - This option will send a multiplexor open
message, scanner label data and then a multiplexor close message.
The open message consists of STX SI CAN CR. The close message
consists of STX SO CAN CR.
Operator Action:
1. When the cursor is positioned on the LASER MODE OF
OPERATION line, press SPACE to display the desired setting.
Press ENTER to select the choice and move the cursor to the next
line.
2. Position the cursor on the LASER BEAM TRACKING line. Press
SPACE to change the settings from YES to NO. When the desired
setting is displayed press ENTER to enter the choice and move the
cursor to the next line.
3. With the cursor positioned on the TRANSMIT AFTER line press
SPACE to change the settings from GATE CLOSES to READ and
back. When the desired setting is displayed, press ENTER to enter
the choice and move the cursor to the next line.
4. Position the cursor at the end of the HOST START SCAN
CHARACTER line. To accept the currently selected character
string press ENTER. To change the character press BACK SPACE
to delete the present string and enter the new character string.
Press ENTER to proceed to the next line.
5. Position the cursor at the end of the HOST STOP SCAN
CHARACTER line. To accept the currently selected character
string press ENTER. To change the character press BACK SPACE
to delete the current string and enter the new character string.
Press ENTER to proceed to the next line.
6. With the cursor on the ACK/NAK TIMEOUT VALUE line enter the
desired value in milliseconds. This value can be between 0 and
9999 milliseconds. Press ENTER to enter the value and move to
the next line.
7. With the cursor on the GATE CONTROL DEBOUNCE VALUE line,
enter the desired value in milliseconds.