PSC LazerData Series 9000E, Installation And Operation Manual

Page: 63 / 104

LOCAL FORMATTING
5-27
END OF MESSAGE STRING - User may select a string of characters to
signify the end of each data transmission. Default string is <CR><LF>
(carriage return, line feed). Maximum length is 10 characters.
GOOD COMPARE STRING - User may select a string of characters to
be transmitted to signify a Good Compare. Default is GC. Maximum
length is 60 characters.
NO COMPARE STRING - User may select a string of characters to be
transmitted to signify No Compare. Default is NC. Maximum length is
60 characters.
SCANNER ID STRING - User may select a character string to identify
the scanner sending the message. In an installation with multiple
decoders connected to a host, this identification string may be
necessary. Maximum length is 10 characters.
FIELD DELIMITER STRING - When data for more than one bar code is
sent during a single transmission, a character or string of characters is
specified that separates the bar code data fields. This occurs if more
than one bar code label is on a single package. Default character is "+".
Control characters must be bracketed, < >. Maximum length is two
characters.
INTERCHARACTER DELAY - Sets the delay between every character
sent to the port.
Operator Action:
1. With the cursor set to the BAUD RATE line press SPACE to step
through the choices. When the desired choice is displayed press
ENTER to select it and move to the next line.
2. With the cursor set to the PARITY line press SPACE to step
through the choices, ODD, EVEN or NONE. When the desired
choice is displayed press ENTER to select it and move to the next
line.