PSC LazerData Series 9000E, Installation And Operation Manual

Page: 43 / 104

LOCAL FORMATTING
5-7
Type the number of the selection you wish to make. The screen for the
selection you make will be displayed.
PAGE 1 - GATE PARAMETERS
Purpose of Screen:
This screen allows the user to set the mode of operation. The user may
select the method of signaling the Series 9000E Bar Code
Scanner/Decoder to read a bar code and assure that only a single
transmission is made for each bar code read.
The user can also control when that transmission is made, and program
the laser beam to follow the gate mode and turn on only when a bar
code is present.
Field Descriptions:
GATE CONFIGURATION
LASER MODE OF OPERATION: Continuous
LASER BEAM TRACKING: NO
TRANSMIT AFTER: GATE CLOSES
HOST START SCAN CHARACTER: <SI>
HOST STOP SCAN CHARACTER: <ETX>
ACK/NAK TIMEOUT VALUE: 0 msec
(0 - 9999 msec for host port only)
DATA CHANGE TIMEOUT VALUE:
0 msec
(0 - 30000 msec)
GATE INPUT DEBOUNCE TIME:
1 msec
(1 - 999 msec for the host port only)
GATE TIMEOUT VALUE:
0 msec
(0 - 30000 msec)
COMPARE MODE:
NO
(See Main Menu Option 8 for Setup)
MASTER/SLAVE MODE:
NO
(Send Gate Open/Close message to the multiplexor)
KEYS: SPACE= BKSPACE=TOGGLE- <CTRL-U>=LAST SCREEN