PSC LazerData Series 9000E, Installation And Operation Manual

Page: 61 / 104

LOCAL FORMATTING
5-25
PAGE 4 - LOCAL PORT FORMATTING
Purpose of Screen:
Allows the user to set the data transfer parameters for the Local Port.
Allows the user to format the data string for the Local Port.
Field Descriptions :
COM HARDWARE PROTOCOL - Hardware protocol is set to RS-232.
COM BAUD RATE - The baud rate can be set using any of the following
values: 300, 600, 1200, 2400, 4800, 9600, 19200, 38400.
COM PARITY - Parity for this port can be set to none, even or odd. If
set to none there is no parity bit in the transmission.
LOCAL PORT PARAMETERS SCREEN
COM HARDWARE PROTOCOL: RS 232
COM BAUD RATE: 9600
COM PARITY: NONE
COM DATA BITS: EIGHT
COM STOP BITS: ONE
COM SOFTWARE PROTOCOL: NONE
COM ECHO/PASS-THROUGH: NO_ECHO
TRANSMIT ON ANY NO READ: YES
TRANSMIT ON ALL NOREADS: YES
TRANSMIT ALGORITHM ID: NO
TRANSMIT READ DIRECTION: NO
START OF MESSAGE STRING:
END OF MESSAGE STRING: <CR><LF>
GOOD COMPARE STRING: GC
NO COMPARE STRING: NC
SCANNER ID STRING:
FIELD DELIMETER STRING: +
INTERCHARACTER DELAY: 0 (0 - 999 msec)
KEYS: SPACE= BKSPACE=TOGGLE- <CTRL-U>=LAST SCREEN