PSC LazerData Series 9000E, Installation And Operation Manual

Page: 7 / 104

READ THIS FIRST
1-1
INTRODUCTION
This section contains vital information necessary for proper installation,
operation and maintenance of the LazerData Series 9000E
Scanner/Decoder Bar Code Reading System. Each item in this section
should be read completely before proceeding to other sections of this
manual. If any questions arise please contact LazerData Applications
Engineering at 1-800-843-2700 for clarification.
FCC CLASS A STATEMENT
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with this manual, may cause
interference to radio communications. It has been tested and found to
comply with the limits for a class A computing device pursuant to
Subpart J of Part 15 of the Federal Communication Commission rules,
which are designed to provide reasonable protection against such
interference when operated in a commercial environment. Operation of
this equipment in a residential area is likely to cause interference, in
which case the user, at his own expense, will be required to take
whatever measures may be required to correct the interference.
NCDRH COMPLIANCE STATEMENT
This laser bar code scanning system complies with Standard 21 CFR,
Subchapter J, for Class I and Class II laser products as set forth by the
National Center for Devices and Radiological Health. Any alteration or
adjustment that could result in emission of radiation in excess of the
level established for Class I or Class II laser products is not authorized,
and will void certification of the system as a Class I or Class II laser
product. Figure 1-1 on the following page shows the type and location of
warning labels affixed to the scanner in compliance to the NCDRH
standard. The Caution and Aperture labels do not apply to the Class I
Infrared scanners.