PSC LazerData Series 9000E, Installation And Operation Manual

Page: 50 / 104

Series 9000E Scanner/Decoder
5-14
PAGE 2 - LEVEL 2 FIELD DEFINITION
Purpose of Screen:
Allows the user to edit existing entries and insert new entries as well as
specify data that will be transmitted along with the bar code data.
Field Descriptions:
CODE TYPE - Any data previously entered will be displayed. If none, all
the entries in this column will read OFF.
XMIT S/S - (Transmit Start/Stop). This controls transmission of Start
and Stop characters with the bar code data. Not all bar codes have
start/stop characters. Not all start/stop characters are transmittable.
Length (number of characters) in field definition must be set long enough
to include start/stop characters if XMIT S/S is enabled.
XMIT CHK DGT - (Transmit Check Digit). It may or may not be
desirable to transmit the check digits contained in some bar codes. Not
all bar codes have check digits. Not all check digits are transmittable.
Length (number of characters) in field definition must be set long enough
to include check digits, if enabled.
LENGTH - Determines the number of characters in the code to be read,
including any check characters and start/stop characters if enabled.
UPC and EAN codes may not have the first and last digits printed. A 0
allows any length of code to be read.
READ COUNT - Number of times the same label must be decoded
before it’s transmitted.
HOST GOOD READ XMIT FORMAT - This entry determines what data
is transmitted from the Host Port when a Good Read occurs. The entry
can be a literal string such as GR, a formatted data string or a
combination of the two. See Data Formatting Codes page 5-17.
LOCAL GOOD READ XMIT FORMAT - This entry determines what data
is transmitted from the Local Port when a Good Read occurs. The entry