Proware 2126JS6H-SQX, User Manual

Page: 86 / 292

NAS System
86 User’s Manual
3. The Snapshot configuration window will be displayed. A system-created Snapshot
name is automatically created. The default snapshot name can be renamed if
needed. Enter the new Snapshot Size (in MB) if the size shown need to be
changed. See details about Snapshot Options below. Click “Create Snapshots” to
start creating snapshot
.
Snapshot Options:

Snapshot Name: The default snapshot name is created by appending the date
and time to the volume name. You can modify the snapshot name but the prefix
volume name will still remain.

Size (MB): This indicates the size of the snapshot volume that will be created.
The default is 10% of the size of the logical volume where snapshot is to be taken.
The size of the snapshot volume will be multiple of the PE size (VG Unit Size).

Origin LV Size: This indicates the size of the Logical Volume where the new
snapshot volume will be created.

Free Volume Group Size (MB): This indicates the amount of free space on the
volume group where the new snapshot volume will be created.

Mount: When checked, the created snapshot volume will be automatically
mounted. When a snapshot volume is mounted, the existing share from the
snapshot volume will be accessible. Note that a snapshot volume is a read-only
volume.

ID: This specifies the shares created under this logical volume.

Snapshot share name: This specifies the name of the snapshot shares. Your
may access these shares by mounting the snapshot volume. The naming format
used is: the last two digit of the year, followed by the month/date, and then
followed by the hour/min/sec. For example: "101217_151612".