Proware 2126JS6H-SQX, User Manual

Page: 280 / 292

NAS System
280 User’s Manual
Volume Status
Example 2:
Replication of one
logical volume is
initializing.
8. Go to Private Net node down to "Ethernet#1". Set the local and peer IP address,
check "Auto Enable on Starting Cluster" then save. Be sure not to select the
public IP (eth0 IP address) for both proNAS servers.
Private Net: Ethernet
Local/peer
Port Number
Specify an unused TCP port for each server to receive the
heartbeat sent from the peer server. The default value is
5000.
Local/peer IP
Address
Specify the IP Addresses of the network interface cards that
constitutes both ends of the private net. These IP
addresses must be on a separate subnet from the public
net.
Heartbeat
Interval Specify the period of time between two consecutive
heartbeats.