Proware 2126JS6H-SQX, User Manual

Page: 215 / 292

NAS System
User’s Manual 215
5.7.5 Serial Ports tab
Com1 and Com2 Serial ports can be configured in this tab for specific application. Press
"Edit".
Com1
Supported Applications are: NAS Device Mgr or proNAS HA
Com2
Supported Applications are: UPS or proNAS HA
When Com2 is set to UPS, the following options can be setup:
UPS Mode: Dumb UPS or UPS (smart)
If Dumb UPS is selected, you don't have to configure the setting about
vendor and cable.
If UPS (smart mode) is selected, you can choose from the three
supported UPS vendors.
UPS Vendor: (a) APC, (b) Beam-Tech, or (c) HyperPro.
APC has many APC smart UPS models supported. Beam-Tech UPS
model supported is SSpro 650. HyperPro UPS model supported is
1410HP.
If you select APC, you can select the Cable Model from the 5 options.
NOTE: Customers must use only the supported UPS vendor models:
APC, Beam-Tech, and HyperPro. If other UPS models are used,
there is no guarantee that the NAS will be able to communicate to
the UPS. The basic UPS function (to provide uninterrupted power
supply to the NAS) will probably work but the Shutdown Delay
might not work using the UPS cable from the “unsupported” UPS
vendor model.