PRONAR T679/5 Operator'S Manual Download Page 88

Page: 88 / 116

PRONAR T679/5

SECTION 5

5.16

FIGURE 5.9

Principle of brake adjustment

(1) brake cylinder rod, (3) expander arm, (4) cylinder fork, (5) position of fork pin, (6) brake cylinder

bracket, (A) mark on the brake cylinder at brake release position, (B) mark on the brake cylinder at full

braking position, (C) position of arm at brake release position, (D) position of arm at full braking

position

5.2.8 REPLACEMENT OF PARKING BRAKE CABLE AND

ADJUSTMENT OF CABLE TENSION.

Proper operation of the parking brake is dependent on the effectiveness of the axle brake

and the correct brake cable tension.

Replacing the parking brake cable

Hitch the trailer to tractor. Park machine and tractor on level surface.

Prevent the trailer from rolling by placing chocks under the wheels. Immobilise

tractor with parking brake.

Fully unscrew the bolt of the parking brake mechanism.

Summary of Contents for T679/5





















































































































Search results

Summary of Contents for T679/5

Reviews:

PRONAR T679/5, Operator'S Manual, Page: 88 / 116

Search results

Summary of Contents for T679/5

Reviews: