PRONAR T679/5, Operator'S Manual, Page: 30 / 116

PRONAR T679/5 SECTION 2
2.4
•
Keep a safe distance during loading and unloading. Do not allow anyone to
approach the place where works are carried out.
•
Load should be protected against moving by means of belts, chains and tapes or
other securing measures. The securing measures must be fitted with a tightening
mechanism and have proper safety certificates.
•
Condition of hydraulic systems must be frequently checked. Oil leaks in the
systems are not allowed.
•
Regularly check the technical condition of the connections and the pneumatic and
hydraulic lines.
•
When connecting the hydraulic lines to the tractor, make sure that the hydraulic
system of the tractor and the hydraulic system of the trailer are not under
pressure.
•
Before beginning repair or maintenance works on pneumatic or hydraulic systems
reduce air or oil pressure.
•
In the event of injuries being caused by pressurised hydraulic oil, contact a doctor
immediately. Hydraulic oil may find its way under the skin and cause infections.
•
Use the hydraulic oil recommended by the Manufacturer. Never mix two types of
oil.
•
After changing the hydraulic oil, the used oil should be properly disposed of.
•
When working on the tyres, chocks or other objects without sharp edges should
be placed under the wheels of the trailer to prevent it from rolling. Wheels can be
taken off the trailer axle only when the trailer is not loaded.
•
The paint coating should be cleaned off before beginning welding work. Burning
paint fumes are poisonous for people and animals. Welding work should be
carried out in a well lit and well ventilated space.
•
During welding work pay attention to flammable and fusible elements (parts of the
hydraulic, pneumatic and electric systems, plastic and rubber parts). If there is a
risk that they will catch fire or be damaged, they should be removed before
commencing welding work.