
SECTION 2
PRONAR T679/5
2.5
•
Repair work on the wheels or tyres should be carried out by persons trained and
entitled to do so. This work should be carried out using appropriate tools.
•
Inspect tightness of wheel nuts after the first use of the trailer, every 2 - 3 hours
during the first month of work and then every 30 hours of use (travel). The
inspection should be repeated individually if a wheel has been removed from the
wheel axle. Wheel nuts should be tightened according to recommendations
provided in section 5 MAINTENANCE.
•
Check the tyre pressure regularly.
•
In the event of any fault or damage, do not use the trailer until the fault has been
fixed. The trailer must not be used when not in working order.
•
When operating the machine wear protective gloves and close fitting clothing and
use the appropriate tools.
•
Servicing and repair work should be carried out in line with the general principles
of workplace health and safety. In the event of injury, the wound must be
immediately cleaned and disinfected. In the event of more serious injuries, seek a
doctor's advice.
•
Repair, maintenance and cleaning work should be carried out with the tractor
engine turned off and the ignition key removed.
•
Regularly check the condition of the bolt and nut connections.
•
Before welding or electrical work, the trailer should be disconnected from the
power supply.
•
During the warranty period, any repairs may only be carried out by warranty
service authorised by the Manufacturer.
•
Should it be necessary to change individual parts, use only original parts. Non-
adherence to these requirements may put the user and other people's health and
life at risk, and also damage the machine and invalidate the warranty.
•
In the event of work requiring the trailer to be raised, use properly certified
hydraulic or mechanical lifts for this purpose. After lifting the trailer, stable and
durable supports must also be used. Work must not be carried out under a trailer,
which has only been raised with a lift or jack.
Summary of Contents for T679/5
